Akkurat QA/QC
What happens downholedepends on whatwas verified first.
We assure, advise on and control the quality of repair, maintenance and inspection processes for equipment and tools in the Oil & Gas industry.
A downhole tool works where no one can see it.
If it fails, the string has to be pulled, the tool replaced and run back in. That rig time can't be recovered.
Quality control
Checks a part: a measurement, a test.
Quality assurance
Verifies that the whole chain —procedures, equipment, people and documents— meets what was agreed. It prevents instead of correcting.
Akkurat assures that chain and leaves evidence of every step.
Workshop quality assurance
The scope is defined with each operator. In the workshop, our service covers:
We verify that magnetic particle inspection (MPI), pre-assembly, assembly and testing are done per DS-1 and the manufacturer's manuals.
We verify the inspection performed by a third party: its procedures, its certified personnel and the tools and equipment it uses.
Every finding becomes a technical alert that is followed up until close-out, along with the improvement opportunities.
Every tool is kept in SpurOS with its history by serial number, and every supplier with its performance.
Standards
We work with DS-1 and each tool's manufacturer manuals. The standard is agreed with each operator.
Scope
Today we provide the service in the workshop. The scope of each job is defined with the operator.
How we work
- 1
Requirement and scheduling
We understand what your operation needs: which tools, for which hole section and to which standard.
- 2
NDT inspection
We verify that the inspection is done with the method, calibrated equipment and certified personnel the standard requires.
- 3
Maintenance and repair
We follow maintenance part by part and record every component's serial number.
- 4
Pre-assembly and assembly
We verify dimensions, the torque on every connection and the final assembly.
- 5
Function testing
We check that it works before it leaves the workshop.
- 6
Reports and close-out
Every day goes into a report, and every finding into an alert followed up until it is closed.
What you receive
The service and the platform, according to the agreed scope.
- Kick-off recordWhat we commit to deliver and the rules of the job.
- Daily quality assurance reportWith photographic evidence.
- Technical alertsFollowed up until closed with evidence.
- Tear Down (disassembly analysis)When a tool fails.
- Final report per hole sectionWith lessons learned.
- Close-out recordFindings, improvement opportunities and open commitments.
- Monthly reportPerformance by supplier and by inspection company.
- Access to SpurOSThe platform where your team checks all of the above online: reports, alerts and the history of every tool.
With SpurOS, your operation on screen.
What we verify in the workshop is kept in SpurOS, the platform we deliver the service with. Your team checks it online, without waiting for a report.
- History by serial numberEvery tool and every part keeps its history, even when it moves to another well.
- Alerts through to closureSee where each technical alert stands, until it is closed with evidence.
- Analytics of your operationAlerts, response times and the performance of each supplier and inspection company.
- Approved reportsNothing is delivered without approval, and every report carries the name of whoever approved it.
- A certificate for every toolDownload it whenever you need it.

Who leads the QA/QC operation
Jaime Duarte
Head of QA/QC operations
He has led maintenance and service optimization processes in the Oil & Gas industry, co-founded a quality assurance company and has taken part in the quality assurance of drilling and completion tools and equipment.
Operators
Service companies
Operators and service companies our team has worked with throughout its career.
Does Akkurat perform the inspection?
No. The inspection is performed by an inspection company. We verify that it's done with the method, certified personnel and calibrated equipment the standard requires. Since we neither inspect nor repair, we verify with no conflict of interest.
How do I hire the service?
Tell us about your operation: which tools, which hole section and which standard. We define the scope together, and the job starts with a kick-off meeting where what's delivered is put in writing.
Where do you provide the service?
Today, in the workshop. The scope of each job is defined with the operator.
Which standards do you work with?
DS-1 and each tool's manufacturer manuals. The standard is agreed with each operator.
What happens if a tool fails?
We carry out the Tear Down (disassembly analysis). The failure is documented finding by finding, and it only counts against the supplier if the analysis supports it.
What is SpurOS?
The platform we deliver the service with. Every report, every alert and the history of every tool are kept there, and your team checks them online.
Let's talk about your operation.
Tell us which tools, which hole section and which standard your operation needs.




